In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks that you can use.
If you have a dog that likes to bark, and especially if your can dogs eat raw cabbage dog loves to play in the garden and other areas of the home, you will need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it’s actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so that you get something that looks like a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Make sure the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you’re done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to paste the mask onto your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and then fold it over. Make sure that it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged securely onto the face of your dog. Do not make the folds too large or else it might look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Be sure that the ears are flat and make sure that it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask because your pet security, you will need to do some sanding to make sure that it is secure on your dog. You can accomplish it by sanding off any excess paper that may have been eliminated from your mask.